Classic Block ­– replicates old Classic Editor ‘while inside the WordPress block editor

The WordPress Gutenberg Block Editor drove humble me away from running my primary Blog at WordPress.com. ‘Following the launch of WordPress 5.0 in December 2018’, the WordPress Block Editorwas set as the default editor and replaced the classic editor’.

I started blogging on Blogger before Google purchased it in 2003. Heck, I even learned how to write my posts in HTML before leaving Blogger in May of 2004. Still, that Gutenberg Block Editor kicked my buttocks every time I tried it. Even setup a free WP blog site to just test the Block Editor.

Had even purchased a $300 WP Business plan to avoid using that durn Block Editor on my Linux Newbie – Since 1996 primary blog. Started looking for a Web Hosting service during that 1-year WP Business plan subscription—hey, I wasn’t about to pay $300 every year for a simple personal blog.

Jeez…what a pain that search was!!! Long story, but the short of it was I settled on a Hostinger 4-year Introductory plan for a onetime cost of $107.56 (about $2.25 a month). Renewal price will be a onetime cost of $335.52 – in 10/19/2026. Gotta check both the Introductory prices & the Renewal prices on any plan you check out!

4-years for the WP Business plan is $1,200. I’ll look for a coupon before renewing in late 2026 to see if that $335.52 can be lowered a tad, but that price breaks down to just $83.88 a year, which is still a bargain.

Read more

Porteus 5.0 Cinnamon – Part 3: Booting the new Fat32 & Ext4 USB’s Porteus 5.0 installation

(NOTE: Am closing down my old Linux Newbie – since 1996 WordPress.com blog (is Private now), and am in the process of refreshing and moving some of the content over to my self-hosted KM&T (Karmi’s Musings & Tech) blog here.)

This is Part 3 of this Porteus v5.0 series, and I am sorta gearing the series towards MS Windows users, but still mindful of interested Linux users. I have been using Porteus Linux since March of 2022, but have found it to be the most interesting Linux OS I have ever used (since 1996), and it has already become my favorite ‘Working‘ Linux OS. I had been using the Porteus 5.0rc3 until Porteus 5.0 was released on July 3rd, 2022. The 5.0 release candidate 3 was fine, but the Porteus 5.0 final release has been smoother ‘n snappier than 5.0rc3 was. Porteus’ Developers/Team have done an excellent job!

In Part 1 we covered creating a fat32 ‘Live‘ Porteus USB, and then using its GParted app to prep a Target drive.

In Part 2 we prepped a Target drive wid two partitions – a 360 MiB fat32 partition & an 114.26 GiB ext4 partition. Then we used the EFI, boot, and porteus folders – located on that fat32 ‘Live‘ Porteus USB to create the new Porteus 5.0 Cinnamon installation that had a fat32 ‘n an ext4 partition.

  • This was the best method I could come up w/ for any interested MS Windows users, who might not have access to apps for creating ext4 formatted partitions.

Read more

Porteus 5.0 Cinnamon – Part 2: Installation – Fat32 *PLUS* Ext4 or Fat32

  • (NOTE: Am closing down my old Linux Newbie – since 1996 WordPress.com blog (is Private now), and am in the process of refreshing and moving some of the content over to my self-hosted KM&T (Karmi’s Musings & Tech) blog here.)

This series is mainly for potential Windows users. In Part 1 I mentioned two options for installing Porteus v5.0 onto a USB: 1) using a fat32 formatted partition. 2) using two partitions – a smaller fat32 formatted partition plus an ext4 formatted partition.

As most Windows users know, formatting a USB drive is limited to a size of just 32 GBs max when using fat32, which is why fat32 formatting is generally found on the smaller USBs.

In this ‘Refresh‘ of the original Part 2 in this Porteus 5.0 Cinnamon series, I am going to cover three Steps in creating various versions of the Porteus 5.0 Cinnamon OS – a ‘Live‘ version which will be used to create the other two versions (or Steps).

Porteus Linux works great on a 32 GB USB…heck, the updated Porteus-CINNAMON-v5.0-x86_64.iso I downloaded was just 359 MBs…1 MB smaller than the 360 MB one I got a few days before.

No *BLOAT* on Porteus Linux! I’ve recently tested it on a 16 GB USB w/ no problems ‘n plenty of room. I even formatted that 16 GB USB w/ Two Partitions – a fat32 plus ext4 partitions.

Read more

Porteus 5.0 Cinnamon – Part 1: Refresh of old Review

Am closing down my old Linux Newbie – since 1996 WordPress.com blog (is Private now), and am in the process of refreshing and moving some of the content over to my self-hosted KM&T (Karmi’s Musings & Tech) blog here.

Have been using Porteus Linux for about 16-months now, as a ‘Companion‘ OS to Win11 Pro, and as my main ‘Working‘ Linux OS—I do a lot of testing on Linux OSes.

Refresh of old Review

Porteus-v5.0 is released!” – I’d been running Porteus 5.0rc3 Cinnamon since around 3/31/2022 and almost immediately placed it as my #1a Linux OS—just ahead of now #1b Fedora Linux. I was very excited about the new release, and have been testing & using it for almost a year now. 👌👍

Read more

ASUS Prime Z790M-PLUS D4 mATX MoBo – BIOS & Drivers

I have found that finding the right ASUS Z790M PLUS D4 drivers can be frustrating for this one. Since 2005/2006 I have purchased $60-$90 motherboards for my builds, but decided to ‘splurge’ on the ASUS Prime Z790M-PLUS D4 mATX MoBo – $171.89 + $12.03 Tax = $183.92.

Requirements were – Micro ATX, Intel Z790, LGA 1700, and 1Gb LAN motherboard. Have moved away from the big ATX & small ITX boards, and prefer the mATX boards and cases now—fact is, I was going to be removing (intact) an older board from my favorite case, a APEVIA X-QPACK3 mATX case, and building a new Intel® Core™ i9-13900K system in it.

I didn’t find a huge mATX selection, and PCPartPicker only had TWO listed, and I went w/ the ASUS Prime Z790M-PLUS D4.

(*1/31/2024 UPDATE: new info in ASUS Prime Z790M-PLUS D4 mATX MoBo: Restore an Image and/or do a Clean Install post*)

Read more

Translate »